No feelings, no iron, the belated Huawei P7 disassembly review
The disassembly evaluation of Huawei P7 came a little late. It is a mobile phone that does not blow the craftsman’s feelings and does not make austenitic 304 ratio. The Rulan gentleman Huawei P7 with a 6.5mm slim body has always been very curious about its internal structure. With this curiosity, I will disassemble the Huawei P7 comprehensively today to find out. From the disassembly, the internal structure of Huawei P7 is similar to the Honor 6 we disassembled before. Its internal structure is not very complicated, but the workmanship is very delicate. The buckle is tight, the structure is tight, and the protection in some details is also very in place, which is very in line with the due level of Huawei’s world’s top 500 international brands.
Huawei P7 adopts a non-removable battery design. Therefore, when disassembling, you need to use a hair dryer to heat the glue of the back case, and then slowly unplug it with a suction cup.
The back case of Huawei P7 is packaged with foam glue, which is very firm. It took a lot of effort to open the back case!
In addition to the graphite with auxiliary heat dissipation, the position of the rear case camera can also be seen to have a protective ring, which can prevent ash from entering on the one hand, and also has a certain waterproof effect. Huawei is quite meticulous.
There are many shielding covers on the main board of Huawei P7, and there are many screws, which are divided into two specifications, black and white.
This is a silver-white screw. When screwing the screw, you can actually feel the feelings of the craftsman.
This is the cable of Huawei P7. When disassembling the main board, you need to open all these cables.
After all the screws are screwed out, the cable is opened, the main board gently pry open can be removed, the main board design and glory 6 similar, but in the details are different, can be seen later.
This is the earphone jack and vibration unit, and the radio frequency antenna can also be seen, so there is no need to disassemble this part.
This part is the speaker of Huawei P7, and it can be seen that the workmanship of this sound cavity is quite good.
The lithium polymer battery behind the Huawei P7 has a capacity of 2530 mAh. It is glued and needs to be blown with a hot hair dryer. There is nothing to see inside, so it is not opened again.